The Wagner painter sprayer is not known to get faulty with ease. In fact, it is one of the brands that many painters live by. However, if you’re experiencing issues with the sprayer and it is not releasing the paint as it should, this does pose a problem.
In many cases, this is not a serious issue that would require you to save up for a new sprayer. A little cleaning and maintenance might be all that is needed or the issue might be a bit more complex.
Whatever the case may be this guide on how to fix a Wagner painter sprayer that is not spraying should help you fix the problem in no time.
Wagner Paint Sprayer Not Spraying: Common Causes
1. Clogged Nozzle
One of the most common causes for a Wagner paint sprayer not spraying is a clogged nozzle. The nozzle is the small opening at the end of the sprayer that the paint passes through before being sprayed onto the surface.
If this opening becomes clogged, the paint will not be able to pass through and the sprayer will not work properly. In most cases, the nozzle becomes clogged with continuous use as paint can build up in the nozzle and cause it to become clogged.
This problem can also be caused by using the wrong type of paint or not properly cleaning the nozzle after use.
2. Airless Spray Tip is Worn Out
A worn-out or damaged spray tip can cause the sprayer to not work properly. The spray tip is the small opening at the end of the nozzle that the paint passes through before being sprayed onto the surface. The spray tip can become worn out over time due to regular use or by using the wrong type of paint.
3. Incorrect Paint Consistency
Using paint that is too thick or too thin can cause a Wagner paint sprayer to not work properly. It is important to follow the instructions for the correct consistency of paint for your particular Wagner sprayer.
If you are using not using the right paint consistency or you’re using paint that is too thick, it may not be able to pass through the nozzle and the sprayer will not spray. On the other hand, if you are using paint that is too thin, it may not provide sufficient coverage when sprayed onto the surface.
4. Malfunctioning Pump
If you suspect that the pump on your Wagner paint sprayer is not working properly, you may need to have it repaired or replaced. The pump is responsible for pushing the paint through the nozzle and out of the sprayer.
If the pump is faulty properly, the paint will not be able to pass through the nozzle and the sprayer will not spray. A faulty pump could be due to some internal issue or a problem with the power supply.
5. Hoses or Connections are Damaged
Another issue that could cause the sprayer not to function as it should is when the hoses or connections are damaged. The hoses and connections are responsible for carrying the paint from the container to the nozzle and out of the sprayer. If these are damaged or not properly connected, the paint will not be able to pass through, and the sprayer will fail to spray.
Wagner Paint Sprayer Not Spraying: DIY Fixes
1. Clean the nozzle
Cleaning the nozzle is rather simple. To do this, turn off the sprayer, then take off the nozzle. When done, you can then use a small wire or toothpick to carefully clean out any debris or dried paint that may be blocking the opening. Be sure to use caution when doing this as you do not want to damage the nozzle.
Once you have cleaned the nozzle, reattach it to the sprayer and test it to see if it is working properly. If you’re still having the issue of the sprayer not spraying properly, move on to other fixes.
2. Replace the airless spray tip
To replace the spray tip, you will need to first turn off the sprayer and remove the nozzle. You can then carefully remove the old spray tip and replace it with a new one.
You can purchase a new spray tip from a Wagner dealer or through online sources. When replacing the spray tip, ensure you follow the instructions carefully so it is installed correctly.
Once you have replaced the spray tip, reattach the nozzle to the sprayer. After that, run a test to see if sprays properly.
3. Use the correct consistency of paint
To ensure that you are using the correct consistency of paint, refer to the instructions for your particular Wagner sprayer. You may need to thin the paint if it is too thick or add a thickening agent if it is too thin.
Once you have the paint at the correct consistency, test the sprayer to see if it is working properly. If the sprayer is still not spraying, you may need to try one of the other fixes listed below.
4. Check the pump
Checking if the pump is faulty would require a visual inspection. This should be easy to identify even for the average users. To start, turn off the sprayer and remove the nozzle. You can then inspect the pump for any visible damage or wear.
If the pump appears to be in good condition, you can try to troubleshoot the issue by checking for any debris or blockages that may be preventing the pump from working properly. If you are unable to fix the issue, you may need to have the pump repaired or replaced by a Wagner dealer or professional.
5. Check the hoses and connections
To check the hoses and connections, start by turning off the sprayer and inspecting the connections and hoses for any visible damage or wear.
If you notice any cracks, holes, or other damage, you will need to replace them. You can purchase new hoses and connections from a Wagner dealer or online. Make sure to follow the instructions for replacing them carefully to ensure that they are installed correctly.
Once you have replaced the hoses and connections, test the sprayer to see if it is working properly. If the sprayer is still not spraying, you may need to try one of the other fixes listed above or reach out to customer support for assistance.