“Should you use a paint sprayer indoors?” This is a question that you always ask yourself when renovating your house. Do you want to know the right answer? Handtoolshouse wrote this article to answer your question. Plus, we’ll show you a few tips on how to use a paint sprayer more proficiently!
Should you use a paint sprayer indoors?
You definitely should! Indoor paint sprayer not only helps the processing process take place quickly, but the paint coverage is also perfect. No streaks, no thin areas that need repainting, and no thick, drippy areas that need retouching.
You should use paint sprayer indoors
Related:
-
Graco 16Y385 TrueCoat 360 Review – Top Rated 2021
There are many occasions which we recommend choosing a paint sprayer to refurbish and repaint the interior of your home. Let’s take a look at those cases:
When the interior is empty
When the room is in the early stages of construction or remodeling, it is an empty canvas. This fabric allows good use for spray painting.
You can spray slowly, covering only a few important areas such as the top of the plumbing, electrical boxes, and windows. When a room is at this point of remodeling, it’s quicker to spray paint than to roll.
When exterior paint has a clear perimeter
Exteriors with mature landscaping, spacious decks, sunrooms, playsets, garages, and anything else near the house that aren’t painted will greatly reduce your prep time.
Clear perimeter means you only need to cover items on the house, not around the house.
When you have a lot of detail and texture
Paint sprayers create intricate compositions such as crown moldings, popcorn or cheese ceilings, building baseboards, deep exterior textures, moldings, false teeth, or masonry.
Paint sprayers are capable of working into the narrowest of crevices, laying down a thin layer of paint. Conversely, brushing or rolling the part surfaces can lead to paint deposits and drips.
How to use a paint sprayer indoors
With paint sprayer you can easily paint your room
Preparation steps
- First thing you should do is to move all the furniture out of the room if you can. For the remaining furniture, move them to the center of the room and cover them carefully. Make room for your tools and equipment.
- Cover everything you don’t want to stick to. Apply protective tape and paper around and on doors, windows, and trim.
- Turn off electricity in the room and remove covers from electrical appliances, outlets, and switches. Remove the ventilation cover of the heating and air conditioning system. Tape the remaining switches and sockets.
- Use a spackling compound and a putty knife to fill all nail and screw holes. Once dry, sand the rough spots.
Spraying steps
- Choose the nozzle that best suits the paint you are using and the surface to be sprayed. Make sure the nozzle hole size does not exceed the maximum capacity of your sprayer (see nozzle information). If you are using paint from multiple containers, mix them together in an empty 5-gallon container to ensure consistent color even if there are slight color differences between individual paint containers.
- Start at the top of the room and work your way up. Work in sections, just as far as you can reach. Spray the outside edges first, “strip” the area you’ll be spraying and cut at any angle. For inside corners, point the nozzle directly at the corner so that it overlaps both sides.
- Cut around the windows and doors first, then spray the remaining flat areas using overlapping strokes. Do multiple sprays down the walls, aiming the nozzle at the edge of the previous line and overlap by about 50%.
Cleaning steps
- Allow a considerable amount of time for the paint to dry before removing the tape from your decor. This will result in sharp, clean lines.
- Remove all coatings from furniture and other areas.
- Replace any lighting that you have removed and move furniture or other items into place.
- Clean your airless sprayer after each use. Follow the instructions in your manual to clean with a Power Flush with a water-based material, or use the bucket cleaning method if available.
- Move furniture or other items back to their original location.
Tips for using paint sprayer indoors
You should learn to adjust the nozzle of sprayer
Keep a damp cloth in your bag to periodically wipe the tip of the sprayer
It can become clogged as the paint begins to harden. This is important! You’ll need to wipe the nozzle more often than you think… but doing so will help prevent the spray from clogging and splashing. If your paint sprayer won’t spray, it’s usually because the nozzle is clogged with dry paint. Keep it clean and you will have great results.
Learn how to adjust the sprayer’s nozzle to change the spray pattern
The horizontal nozzle position creates a vertical pattern; a vertical nozzle creates a horizontal pattern. Placing the nozzle diagonally will create more circular spray patterns.
Stand close to the wall and hold the sprayer 6-8 inches from the wall
The further you step back, the wider and thinner your paint area will be. Standing close to the wall helps you get a thick and beautiful coat on the first try. You want to keep the sprayer closer to the wall than you think; If you feel almost strange, you’re probably doing it right.
Apply paint in strokes
Pull your finger off the trigger at the end of each pass to let the paint drift away (instead of doubling an application by continuing to run the sprayer row after row) ). Overlap each spray by about 50% to ensure full coverage.
Final Thoughts
Hopefully, through this article, you have found a satisfactory answer to the question: “Should you use a paint sprayer indoors?” okay then! You can completely use a paint sprayer instead of a paint roller to paint the interior of your home. Follow Paint Sprayers for more interesting articles!
> Read more:
Top 10 Best Sprayer For Staining A Fence And Buying Guide 2021
Best latex paint sprayers in 2021