Products recommended in the post contain affiliate links. If you purchase something through our posts, we may receive a commission at no extra charge to you. See our full disclosures here.

Painting tips: How To Use A Paint Sprayer To Paint A Wood Fence


You may know that fences contribute to our house’s attractiveness that draws the attention of by-passers or visitors. For a good impression of your house, it’s essential to renovate your fence when it’s gone their beauty. Nowadays, a fence sprayer comes as a smart choice for you to renew and decorate your wood fence.

But, how to use a paint sprayer to paint a wood fence? Well, it’s easy-peasy for you after properly follow our today’s article step-by-step.

In this article, we will guide you through what tools and equipment you need, as well as steps on how to paint a fence with a sprayer. Keep reading!


Tools and equipments

  • Paint sprayer
  • Plywood and a large tarp – for cleaning the surroundings
  • Hat or spray sock – for protecting your head
  • Sandpaper – for smoothing the fence
  • Rag, soap or an H3 brush
  • Dust mask, glasses
  • Buckets
  • White spirit for cleanup
  • Paintbrush

How To Use A Paint Sprayer To Paint A Wood Fence – Step-by-step guide


Prepare the surface

The first step in fence painting is to prepare the fence’s surface to achieve a fast and smooth fence paint and an excellent finish.

Clean up the surrounding

Spend some time cleaning up the surroundings so that you can avoid painting on grass or plants grown near the fence, which causes troubles to your later cleanup.

What you should do is to mow the lawn surrounding the fence. Use plywood to prevent the paint from drenching the plants. Then, use a large tarp as the protection for the grass.

Take out loose nails

Remember to unscrew loose nails to apply a smooth coating to the entire fence. It’s better to do a careful preparation for the fence so that you can work on your painting smoothly. After finishing painting, you can reinstall new nails and screws.

Sand the fence

Before starting your project, ensure the surface of the fence is smooth. It is ideal to use sandpaper to sand the whole surface, dealing with rough areas and removing splinters that remain on the fence.

Remove residual by washing the fence

There will be residual on your fence, such as dust, lichen, or algae. Therefore, you should go for a fence cleaner like a rag, H3 brush, or soap to remove them.

It’s essential to research the fence’s material to decide whether it needs soap spraying or not and use the right type and quantity of solvents for your wooden fence.

Paint spraying

After finishing your cleanup, it’s time to learn how to use a paint sprayer to paint a wood fence.

Set up your spraying

Carefully read the manuals. Choose your desired painting color then filling it into the paint sprayer’s bucket. Keeping in mind is to use oil-based paints for wood-friendly and durable fences under the harsh exterior environment.

After filling paint, attach the bucket to the fence spray gun. Various sized nozzles are changeable for you to work on different surfaces.

If you don’t do fence painting on the small areas, spray for fences with the nozzle’s largest size. However, if your fence has small cracks and crevices, you should use a smaller nozzle to ensure precision.

Priming the Fence

Before spraying the fence, let’s prime it by a paintbrush. Prime horizontally for horizontal panels and vertically for vertical panels.

Let it dry for a while after applying the prime. The drying period depends on the type of primer you use and can be seen on the primer instruction.

Spraying your Fence

When spraying your fence, it’s advisable to keep a distance of 6-8 inches from the nozzle to the fence for a smooth painting and the best finishing.

Steadily paint your fence back and forth. For horizontal panels, paint it up and down for an even surface. For vertical panels, paint it back and forth.

How To Use A Paint Sprayer To Paint A Wood Fence4

Steadily paint your fence in a back and forth movement

When you have done fence painting in each panel, give the panel another spraying layer at an angle of 90 degrees to the previous work. Doing this can remove the streaks out of your fence. Careful of arcs got at each stroke that can lead to paint got in places you don’t expect.

Applying one more coat

After the fence was painted and dry, review them carefully. If your fence painting lacks harmony, some places are painted slightly thin, and you should decide to spray one more coat to give the fence a smooth finish. In case your fence painting is excellent, you don’t need an extra coat.

To know the drying time, have a look at the attached instructions on the paint you buy. It’s normal for paints to get dry overnight.

Do the Cleanup

Spend your time waiting for the paint to dry. After they’re dry, remove all the coverings, then reassemble your fence and return it to their first location.

Then, we suggest you have your paint sprayer cleaned immediately. Otherwise, it may have paint sticking on or inside.

Wash your brushes in a proper liquid depending on the type of painting, find it by reading the cleaning instruction. Normally, brushes are washed in warm water for ordinary painting or in white spirit for oil paint.

Well done! You’ve nailed it. Now the finishing fence will be durable and charming for years.


With practice, everyone can find it easy to spray paint fences. You only need to follow our guide step by step properly and then complete a fence pro paint and keep your fences eye-catching to your neighbors and visitors.

We hope our tips on how to use a spray painter to paint a fence are helpful for you. Enjoy painting your fence, and see you in our next articles!