Products recommended in the post contain affiliate links. If you purchase something through our posts, we may receive a commission at no extra charge to you. See our full disclosures here.

Greenworks Chainsaw Problems & DIY Fixes

Greenworks chainsaws are a popular choice for homeowners and professionals alike due to their versatility, durability, and ease of use. However, like any other tool that you own, Greenworks chainsaws can experience issues from time to time. 

In this guide, we will discuss some of the most common problems that Greenworks chainsaws encounter, as well as provide DIY solutions to help you fix these issues.

Keep in mind that while the solutions provided in this guide can help you fix many common problems, some issues may require the assistance of a professional. Always refer to the Greenworks chainsaw user manual and follow proper safety procedures before attempting any repairs.

Greenworks Chainsaw Problems and DIY Fixes

greenworks chainsaw problems

1. Greenworks Chainsaw Engine Won’t Start

Problem: The Greenworks chainsaw won’t start despite trying to crank the engine.

Causes: The following are some of the most common causes of this problem:

  • Clogged air filter: One of the most common issues would be a clogged air filter. This can restrict the flow of air to the engine, making it difficult to start. 
  • Old fuel: Having fuel in the chainsaw sitting for a long time could be a problem. The fuel may become stale and no longer able to ignite. 
  • Faulty spark plug: A faulty spark plug is also a problem as it can prevent the engine from starting by not generating enough spark to ignite the fuel. 
  • Clogged carburetor: Finally, you would want to check for a clogged carburetor. This can prevent fuel from flowing into the engine, making it difficult to start.

Fixes: To fix this issue, try the following steps:

  • Clean the air filter: Remove the air filter and clean it with soap and water. Allow it to dry completely before reinstalling it. 
  • Replace the fuel: Drain the old fuel from the chainsaw and fill it with fresh fuel. 
  • Check the spark plug: Remove the spark plug and check if it is dirty or damaged. Clean or replace it as necessary. 
  • Clean the carburetor: Remove the carburetor and clean it with carburetor cleaner. Reinstall the carburetor once it is clean.

2. Greenworks Chainsaw Engine Cuts Out

Problem: The Greenworks chainsaw engine cuts out unexpectedly during use.

Causes: The following are some of the most common causes of this problem:

  • Clogged fuel filter: A clogged fuel filter can restrict the flow of fuel to the engine, causing it to cut out.
  • Dirty carburetor: If the carburetor is dirty, it can prevent fuel from flowing into the engine, causing it to cut out.

Fixes: To fix this issue, you can follow the steps below:

  • Replace the fuel filter: Remove the fuel filter and replace it with a new one. 
  • Clean the carburetor: Take out the carburetor and clean it with a carburetor cleaner. When done, reinstall it and check if it works.

3. Greenworks Chainsaw Chain Won’t Turn

Problem: The chain on the Greenworks chainsaw won’t turn or moves slowly.

Causes: The following are some of the most common causes of this problem:

  • Dull chain: A dull chain will struggle to cut through wood and can cause the chain to turn slowly or not at all. 
  • Loose chain tension: If the chain tension is too loose, it can cause the chain to slip on the bar and not turn. 
  • Worn-out sprocket: A worn-out sprocket can prevent the chain from turning smoothly.

Fixes: To fix this issue, apply the following steps:

  • Check the sharpness of the chain: Use a file to sharpen the chain if it is dull. 
  • Adjust the chain tension: Use the chain tensioning screw to adjust the chain tension so that it is snug but not too tight. 
  • Replace the sprocket: If the sprocket is worn out, remove it and replace it with a new one.

4. Greenworks Chainsaw Engine Leaks Oil

Problem: The Greenworks chainsaw engine leaks oil.

Causes: The following are some of the most common causes of this problem:

  • Worn-out oil seal: A worn-out oil seal can cause oil to leak from the engine. 
  • Damaged gasket: A damaged gasket could be the cause of the oil leak.

Fixes: To fix this issue, try the following steps:

  • Replace the oil seal: Remove the oil seal and replace it with a new one. 
  • Replace the gasket: Take out the gasket and have it replaced.

5. Greenworks Chainsaw Chain Comes Off

Problem: The chain on the Greenworks chainsaw comes off while in use.

Causes: The following are some of the most common causes of this problem:

  • Loose chain tension: If the chain tension is too loose, it can cause the chain to come off the bar. 
  • Worn-out bar stud: A worn-out bar stud can cause the chain to come off the bar.

Fixes: To fix this issue, follow the steps below:

  • Adjust the chain tension: Use the chain tensioning screw to adjust the chain tension so that it is snug but not too tight. 
  • Replace the bar stud: If the bar stud is worn out, remove it and replace it with a new one.

6. Greenworks Chainsaw Vibration During Use

Problem: The Greenworks chainsaw vibrates excessively during use.

Causes: The following are some of the most common causes of this problem:

  • Dull chain: A dull chain could lead to excessive vibration while cutting through wood. 
  • Worn-out bar: A worn-out bar can also cause excessive vibration.

Fixes: To fix this issue, try the following steps:

  • Check the sharpness of the chain: Use a file to sharpen the chain if it is dull. 
  • Replace the bar: If the bar is worn out, remove it and replace it with a new one.

Wrapping Up

Before attempting any DIY fixes, make sure to consult the Greenworks chainsaw user manual and follow proper safety procedures. If you are unsure of how to perform a repair, it is best to seek the assistance of a professional.

Most Greenworks chainsaw issues are easy to fix and could easily be avoided by performing regular maintenance. Always follow the maintenance guidelines in the manual to prevent such issues.