Products recommended in the post contain affiliate links. If you purchase something through our posts, we may receive a commission at no extra charge to you. See our full disclosures here.

Eureka Vacuum Not Suctioning: How to Fix

If your Eureka vacuum cleaner is not suctioning properly, it can be problematic. This would stall the cleaning process and take some of your time. However, it’s not every case of suctioning issue that indicates that the vacuum would be in need of a replacement. 

In some cases, the Eureka vacuum just needs a bit of maintenance and in other cases, there are some components that need replacing. 

In this guide, we will cover some common causes of poor suction in Eureka vacuums and provide the steps to take to troubleshoot and fix the problem.

Eureka Vacuum Not Suctioning: How to Fix — DIY Tips

eureka vacuum not suctioning

1. Check the Filter

The filter is a crucial component that helps to capture dirt and debris, and if it is clogged or dirty, it can reduce suction power.

To check the filter:

  • Locate it in the vacuum and remove it. You can confirm the location of the filter by checking the user manual
  • Inspect the filter for any dirt or debris and clean it with a brush or tap it gently to remove any loose dirt.
  • If the filter is excessively dirty or damaged, it would be best to get a replacement rather than clean it.
  • Make sure to check the filter regularly and clean or replace it as needed.
  • When cleaned or replaced, you can reinsert the filter back into the vacuum and test the vacuum to see if it working. 
  • If this doesn’t fix the problem, you can move on to other fixes. 

2. Check the Hose

A clogged hose can also restrict suction and make cleaning more difficult.

To check the hose

  • Disconnect it from the vacuum and examine it for any blockages.
  • Use a long, flexible brush or a straightened coat hanger to remove any debris that may be lodged in the hose.
  • Make sure to check the hose regularly and remove any blockages as soon as you notice them.
  • When done, you can re-connect the hose to the vacuum and check to see if the suction is working properly. 

3. Check the Brush Roller

The brush roller on the vacuum helps to loosen dirt and debris. With continuous use, this area can get clogged with debris. When this happens, it would lose its suction power and you will notice that the vacuum cleaner is not suctioning. 

To check the brush roller 

  • Locate it inside the vacuum and remove it. If you’re not able to do so easily, then you might want to check your user manual on how to remove the brush roller on our particular model.
  • Inspect the brush roller for any debris or tangled hair and remove them.
  • Make sure the brush roller is not damaged and is turning freely.
  • Clean the brush roller regularly to ensure it is free of debris.
  • Once you’ve cleaned the brush roller, you can place it back into the vacuum and test it. If the brush roller is damaged, you will have to consider getting a replacement.

4. Check the Belt

A worn or broken belt could be the cause of the suctioning issue so you will have to get it checked out. 

To check the belt

  • You can consult your user manual on where to find the belt in your particular model. Once you’ve found and accessed the belt inside the vacuum, inspect it for any signs of wear or damage.
  • If the belt is worn or broken, you will have to get it replaced.
  • If the belt appears to be in good condition, you can move on to other fixes.

5. Check the Motor

In some cases, the poor suction or lack of suction could be due to a faulty motor. 

However, before you consider that the motor is the problem, you might want to apply all the fixes we’ve discussed above. If none of them works out, then you can consider fixing the motor. 

Fixing the motor of the vacuum would require getting a professional to look at it. Sometimes, you might be better off with a new vacuum rather than a fixed option. This is the best option to go for if you’ve been using the vacuum for several years.

How To Maintain The Eureka Vacuum

Regularly empty the dustbin: The dustbin should be emptied after every use or when it is full. This will ensure that the vacuum has optimal suction power and prevents the filter from getting clogged.

Clean the filter: The filter of the vacuum will get clogged with continuous use and should be cleaned or replaced on a regular basis, depending on usage. Refer to the user manual for specific cleaning instructions. 

Check for clogs: Check the vacuum hose and attachments for clogs on a regular basis. Use the brush attachment to remove any debris that may be stuck in the hose or attachments.

Clean the brush roll: The brush roll is another area that requires attention. It should be cleaned of tangled hair and debris on a regular basis. Use scissors to cut off any tangled hair or debris that may be wrapped around the brush roll.

Keep the vacuum in a dry place: Avoid storing the vacuum in damp or humid areas, as this can cause mold to form in the vacuum or attachments.

Store the vacuum in the right way: When not in use, store the vacuum in an upright position to prevent the motor from getting clogged. Also, make sure to unplug the vacuum before storing it.

Keep the vacuum wheels clean: Clean the wheels of the vacuum regularly to prevent dirt and debris from getting stuck in the wheel bearing. This can cause the vacuum to be harder to push or maneuver.

Follow the manufacturer’s instructions: Always refer to the user manual for specific cleaning and maintenance instructions for your Eureka vacuum.

Wrapping Up

The fixes we have discussed above are the best ways to troubleshoot and fix the problem of poor suction in your Eureka vacuum cleaner. You might want to start from the top before coming to the conclusion that the motor is the problem. If none of these fixes help you, then you might want to reach out to Eureka customer care for assistance or get a technician to apply the right fix.